 
Complete, everything you need to convert to disc brakes plus
bearings, seals and spindle hardware using your stock jeep rims (NO
GRINDING). |
Front Disc Brake conversion kit that works
with stock 15" jeep wheels with no grinding.
Deluxe package:
Includes, pre assembled 7/8" rotors with hubs and wheel studs,
caliper hangers, caliper hanger plates, oil seal, spindle nut kits,
calipers, brake pads, mounting hardware kit , inner wheel bearing
set (2), outer bearing set, 2 seals, 1/4" wheel spacers, lug nut set, brake
hoses and complete detailed step by step instructions |
Fits
all Dana 25/27/ front axles. This is a complete rebuild kit for
both wheels Direct bolt on with no grinding for all Dana 25/27 axles with 10"
brakes. This kit includes all parts you will need to change from drum to
disc brakes and replace your old bearings, wheel hubs, seals, and hoses.
All wear
parts in this kit are over the counter parts that can be purchased at any
auto parts store. All part numbers will be included.
DBK25/27DSW
$659.00
Flat rate shipping $30.00 anywhere in the USA |
Disc brake conversion kit for stock jeep rims. In this kit, you use
your old wheel hubs, bearings, seals, spindle nut kit (NO
GRINDING). |
Front Disc Brake conversion kit that works
with stock 15" jeep wheels with no grinding.
Basic package:
7/8" rotors, wheel studs, 1/4" wheel spacers, lug nut set,
caliper hangers, caliper hanger plates, brake pads, mounting hardware, brake
hoses and complete step by step instructions with photos.
|
Fits
all Dana 25/27/ front axles. Direct bolt on with no grinding for all Dana
25/27 axles with 10"
brakes. This kit includes all parts you will need to change from drum to
disc brakes..
All wear parts in this kit are over the counter parts that can be purchased
at any auto parts store. All part numbers will be included.
DBK25/27BSW $486.00
Flat rate shipping $24.00 anywhere in the USA |
| Brake booster
tire guide 7" booster good for stock jeepster up to 32" tires
8" booster 33"-34" tires
9" booster 35" tires
|
|
 
  |
Deluxe package: Comes with 7",
8", 9" boosters Power brake booster/master cylinder.
This is a direct bolt in for your jeepster or commando. Mounting
blocks and connecting rod are precision machined to OEM
specifications. Multi port master cylinder makes it easy to run the
brake lines, bleed master cylinder and also install the brake switch. This unit works for
drum/drum, disc/drum, and disc/disc |
All parts are new
Dual diaphragm booster, booster mounting
bracket to master cylinder and linkage, 1" multi port master cylinder,
fire wall mounting blocks, fire wall flashing plate, grade 8 mounting
hardware, check valve, master cylinder fittings and brake switch
7" booster kit PN 6773-D7 $311.00
8" booster kit PN 6773-D8 $321.00
9" booster kit PN 6773-D9 $399.00
|
  |
Dual port 1" bore Master cylinder
with 9/16" & 1/2" Ports |
PN 1321H-MC
$54.50 |
 |
Master cylinder Disc/Drum with power brakes.
No brake light switch port |
Perfect for upgraded
disc/drum conversions. Fender side ports PN
83300111 $85.00 |
|
|
Master cylinder Disc/Drum without power
brakes. No brake light switch port |
Perfect for upgraded
disc/drum conversions. Fender side ports PN
J8134270 $83.00 |
 |
7"Dual diaphragm brake booster with bracket,
fire wall mounting blocks, grade 8 mounting bolts (8) and linkage rod |
PN 6773-BBL7
$234.00 |
|
|
8"Dual diaphragm brake booster with bracket,
fire wall mounting blocks, grade 8 mounting bolts (8) and linkage rod |
PN 6773-BBL8
$244.00 |
 |
9"Dual diaphragm brake booster with bracket,
fire wall mounting blocks, grade 8 mounting bolts (8) and linkage rod |
PN 6773-BBL9
$344.00 |
 |
Brake light switch |
PN 931216
$8.00 |
 |
Fire wall mounting spacers with grade 8
mounting bolts (8) made to OEM specifications |
Set of two spacers with 8 grade 8 mounting bolts
and lock washers PN 943341
$57.75
|
 |
Pedal linkage rod made to OEM specifications |
PN 948324
$13.50 |
 |
Eccentric cam bolt used to adjust the brake
pedal travel. This cam allows you to fine tune your power brake
system. This was only offered from the factory on power brakes.
This part was machined to OEM specifications |
PN 946725 $26.50
|
 |
Proportioning valve for Disc/Drum
brakes |
PN pv-2 brass
$58.90 |
 |
Proportioning valve for Disc/Disc
brakes |
PN pv-4 brass
$58.90 |
  |
Disc/Drum; For use with 9/16" & 1/2" Ports; Bottom Mount
Brass Proportioning Valve, Steel Lines, Bracket and Proportioning Valve
Plug. Works with M/C 1321H-MC, bakes lines can be ran from either side
of the master cylinder |
PN PV2K-2BM
$97.00 |
|
|
Disc/Disc; For use with 9/16" & 1/2" Ports;
Bottom Mount Brass Proportioning Valve, Steel Lines, Bracket and
Proportioning Valve Plug. Works with M/C 1321H-MC, bakes lines can be
ran from either side of the master cylinder |
PN PV4K-2Bm
$97.00 |
 |
Residual check valve 10 lbs. |
PN RCV-10
$20.67 |
 |
Residual check valve 2 lbs. |
PN RCVv-2
$20.67 |
 |
4 3/4"pedal extension rod |
PN PRE-5564
$13.50 |
 |
1 1/2" pedal rod extension |
PN PRE-104
Price $7.80 |
|
 |
New Front parking brake cable |
This is a new hand brake cable for 67-71 Jeepsters Manual transmission Cable length 60 1/2"
PN 945270
$30.00 |
|
|
New Front parking brake cable |
This is a new hand brake cable for 67-71 Jeepsters Automatic transmission
Cable length 70"
PN 945271
$30.00 |
|
 |
New Rear parking brake cable |
This is a new rear brake cable for 67-71 Jeepsters.
Manual transmission Cable length 134"
PN 942587
Price $65.00 |
|
|
New Rear parking brake cable |
This is a new rear brake cable for 67-71 Jeepsters.
Automatic transmission Cable length 113 1/4"
PN 943558
$65.00 |
|
 |
cylinder, front brake |
left
or right with 10" brakes PN 938115
$24.50 |
|
 |
cylinder, left rear brake |
Left
rear with 10" brakes PN 938116
$24.00 |
|
 |
cylinder, right rear brake |
Right
rear with 10" brakes PN 938117
33.75 |
|
 |
Brake hose front |
Fits left or right with 10" drum brakes PN 937347
$18.50 |
|
 |
Brake hose rear |
Fits all Dana 30/44 rear axles
PN 914455
$18.50 |
|
 |
10" Self Adjusting left rear |
Fits all 10" rear axles
PN 16739.03
$11.80 |
|
 |
10" Self Adjusting right rear |
Fits all 10" rear axles
PN 16739.04
$11.80
|
|
 |
Brake pedal pad |
Fits 67-71 Jeepster
PN
948758 $6.75
|
